Development of an advanced velocity modulator for a portable Mössbauer spectrometer
Joanne Yoon, Jaegi Lee, Sung-Joon Ye, and Young-bong Bang
Scientific Reports, Vol. 13, No. 1, pp. 19856, 2023.
A Fast Actuation Mechanism and Energy-Effective Driving Method for Pulse-Closers
Joanne Yoon, Raehun Jung, Young-il Kim, Sung-Joon Ye, and Young-bong Bang
IEEE Transactions on Industrial Electronics, Vol. 70, No. 2, pp. 1331-1341, 2023.
A high-speed, short-stroke xy-stage with counterbalance mechanisms for highly focused laser machining
Joanne Yoon, Raehun Jung, Sung-Joon Ye, and Young-bong Bang
Microsystem Technologies, Vol. 28, No. 10, pp. 2361-2368, 2022.
Mask–substrate gap control system for exposure equipment
Raehun Jung, Joanne Yoon, Bu Hyun Shin, Sang-Gil Ryu, Sung-Joon Ye, and Young-bong Bang
Microsystem Technologies, Vol. 27, No. 6, pp. 2395-2406, 2021.
Measurement and compensation of errors in absolute encoder using dual absolute encoder system
Kyung-min Lee, Taehyeong Gu, and Young-bong Bang
Microsystem Technologies, Vol. 26, No. 11, pp. 3469-3476, 2020.
Analysis of accuracy and measuring range of dual absolute encoder system
Kyung-min Lee, Taehyeong Gu, and Young-bong Bang
IEEE Sensors Journal, Vol. 20, No. 6, pp. 2997-3004, 2020.
Multi-speed transmission mechanism using a compound planetary gear set and brakes
Young-bong Bang
International Journal of Automotive Technology, Vol. 20, No. 4, pp. 739-748, 2019.
Exoskeletal master device for dual arm robot teaching
Chang-Hyuk Lee, Jiwon Choi, Hooman Lee, Joongbae Kim, Kyung-min Lee, and Young-bong Bang
Mechatronics, Vol. 43, pp. 76-85, 2017.
Power-assisted wheelchair with gravity and friction compensation
Kyung-min Lee, Chang-Hyuk Lee, Soonwook Hwang, Jiwon Choi, and Young-bong Bang
IEEE Transactions on Industrial Electronics, Vol. 63, No. 4, pp. 2203-2211, 2016.
A compact stair-climbing wheelchair with two 3-DOF legs and a 1-DOF base
Chang-Hyuk Lee, Kyung-min Lee, Jehong Yoo, In-su Kim, and Young-bong Bang
Industrial Robot: An International Journal, Vol. 32, No. 2, pp. 181-192, 2016.
Designing a permanent-magnetic actuator for vacuum circuit breakers using the Taguchi method and dynamic characteristic analysis
Chang-Hyuk Lee, Bu Hyun Shin, and Young-bong Bang
IEEE Transactions on Industrial Electronics, Vol. 63, No. 3, pp. 1655-1664, 2016.
Shaft position measurement using dual absolute encoders
Kyung-min Lee, Jiwon Choi, and Young-bong Bang
Sensors and Actuators A : Physical, Vol. 238, pp. 276-281, 2016.
3-speed transmission using dual motors and one-way clutches
Young-bong Bang and Minkeun Yoon
IEEE/ASME Transactions on Mechatronics, Vol. 21, No. 1, pp. 412-418, 2016.
Automatic C-arm repositioning using a two-bar link system for reducing radiation exposure
Jiwon Choi, Chang-Hyuk Lee, Kyung-min Lee, Sung-Joon Ye, and Young-bong Bang
Journal of Mechanics in Medicine and Biology, Vol. 15, No. 6, pp. 1540054, 2015.
Surface coating for prevention of metallic seed migration in tissues
Hyunseok Lee, Won Seok Lee, Jong In Park, Kwang-Jae Son, Min Park, Young-bong Bang, Young Bin Choy, and Sung-Joon Ye
Medical Physics, Vol. 42, No. 6, pp. 2805-2812, 2015.
Development of real-time motion verification system using in-room optical images for respiratory-gated radiotherapy
Yang-Kyun Park, Tae-geun Son, Hwiyoung Kim, Jaegi Lee, Wonmo Sung, Il Han Kim, Kunwoo Lee, Young-bong Bang, and Sung-Joon Ye
Journal of Applied Clinical Medical Physics, Vol. 14, No. 5, pp.25-42.2013
Development of an anthropomorphic robotic arm and hand for interactive humanoids
Jamie K. Paik, Bu Hyun Shin, Young-bong Bang and Young-Bo Shim
Journal of Bionic Engineering, Vol. 9, No. 2, pp. 133-142, 2012.
An earthworm-like actuator using segmented solenoids
Hyun Shin, Seung-Wook Choi, Young-Bong Bang and Seung-Yop Lee
Smart Materials and Structures, Vol. 20, No. 10, pp. 105020, 2011.
Motion teaching method for complex robot links using motor current
Wonseok Lee, Young-bong Bang, Kyung-min Lee, Bu-hyun Shin, Jamie Kyujin Paik, and In-su Kim
International Journal of Control, Automation, and Systems, Vol. 8, No. 5, pp. 1072-1081, 2010.
Fabrication of free-form surfaces using a long-stroke fast tool servo and corrective figuring with on-machine measurement
Ho-sang Kim, Kwang-il Lee, Kyung-min Lee, and Young-bong Bang
International Journal of Machine Tools and Manufacture, Vol. 49, No. 12-13, pp.991-997, 2009.
Development of a programmable vibration cutting tool for diamond turning of hardened mold steels
Ho-sang Kim, Sang-in Kim, Kwang-il Lee, Dae-hee Lee, Young-bong Bang, and Kyo-il Lee
International Journal of Advanced Manufacturing Technology, Vol. 40, No. 1-2, pp. 26-40, 2009.
Metal foil method for noncontact measurement of lateral vibrations of a nonmetallic cylinder by a solenoid
Soon Woo Han, Young Bong Bang, and Yoon Young Kim
Applied Physics Letters, Vol. 89, No. 14, pp. 141905, 2006.
Development of a PC based milling machine operated by STEP-NC in XML format
Wonseok Lee, Young-bong Bang, Myung Seon Ryou, Wook Hyun Kwon and Haeseong J. Jee
International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 593-602, 2006.
Development of a data interface for rapid prototyping in STEP-NC
Myung Seon Ryou, Haeseong J. Jee, Wook Hyun Kwon and Young-Bong Bang
International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 614-626, 2006.
3 DOF anthropomorphic oculomotor simulator
Young-Bong Bang, Jamie K. Paik, Bu-Hyun Shin, and Choongkil Lee
International Journal of Control, Automation, and Systems, Vol. 4, No. 2, pp. 227-235, 2006.
Micro parts assembly system with micro gripper and RCC unit
Young-bong Bang, Kyung-min Lee, Juho Kook, Wonseok Lee, In-su Kim
IEEE Transactions on Robotics, Vol. 21, No. 3, pp. 465-470, 2005.
5-axis Micro Milling Machine for Machining Micro Parts
Young-bong Bang, Kyung-min Lee and Seungryul Oh
International Journal of Advanced Manufacturing Technology, Vol. 25, No. 9-10, pp. 888-894, 2005.
Large thrust linear motors for low-duty-cycle operation
Young-bong Bang and Kyung-min Lee
Mechatronics, Vol. 14, No. 8, pp. 891-906, 2004.
Linear motor for ejector mechanism
Young-bong Bang and Kyung-min Lee
International Journal of Advanced Manufacturing Technology, Vol. 24, No. 7, pp.582-589, 2004.
Two-stage electrohydraulic servovalve using stack-type piezoelectric elements
Young-Bong Bang, Kyo-il Lee, Choon-Shik Joo and Jae-Woong Hur
Proceedings of the Institution of Mechanical Engineers C-Journal of Mechanical Engineering Science, Vol. 208, No. 1,
pp. 53-65, 2004.
The design and implementation of ISO 14649 compliant CNC milling machine
Wonseok Lee and Young-bong Bang
International Journal of Production Research, Vol. 41, No. 13, pp. 3007-3017, 2003.
Linear motor drive ultrahigh-speed injection moulding machine
Y. B. Bang and S. Ito
Proceedings of Institute of Mechanical Engineers B-Journal of engineering manufacture, Vol. 216, No. 5, pp. 773-781,2002.
Automation of centered micro hole drilling using a magnetically levitated table
Toshiro Higuchi, Young-bong Bang, Yasuo Motegi, and Masahiro Tsuda
Machine Tools and Manufacture, Vol. 39, No. 9, pp. 1409-1426, 1999.
Drill breakage detection and measurement of distance to the drilling surface on the micro drilling machine using voice coil motors
Young-bong Bang and Toshiro Higuchi
International Journal of the Japan Society for Precision Engineering (Currently, J. of the Int. Society for Precision Engineering and Nanotechnology), Vol. 33, No. 1, pp. 15-20, 1999.
Development of a micro drilling machine using voice coil motors (Part 2) - Thrust controlled drilling
Young-bong Bang and Toshiro Higuchi
International Journal of the Japan Society for Precision Engineering (Currently, J. of the Int. Society for Precision Engineering and Nanotechnology), Vol. 32, No. 4, pp. 267-272, 1998.
Development of a micro drilling machine using voice coil motors - Drill thrust measurement and high speed driving
Toshiro Higuchi and Young-bong Bang
International Journal of the Japan Society for Precision Engineering (Currently, J. of the Int. Society for Precision Engineering and Nanotechnology), Vol. 32, No. 2, pp. 116-121, 1998.
10th floor, 214, Yulgok-ro, Jongno-gu, Seoul, 03122, Korea
Copyright 2020. Medical Robotics and Actuator Systems Laboratory. Seoul National University Hospital. All Rights Reserved.